Sol-Luna Shrine

SGD 95.00

You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.

Sol-Luna
The alchemists’ names for gold and silver, sun and moon. Opposites that keep each other in balance. For the things that come in cycles: a birthday, an anniversary, a season you look forward to, someone you miss at the same time every year.

Sanggam-inspired carving in Vulcan black clay, inlaid with buff clay slip. The rim of the oval window is glazed in dark and light matte tones that surface through the texture, and the rest is left raw.

Included:

  • A 5×7 mirror sheet

  • A hardboard backing.

Size and fit:

  • Shrine dimensions: Approx 17.5cmL x 14cmW x 3.5cmH

  • 5×7 Inset area: Approx 5.3cmW x 7.4cmH

How it works:

  • 2 turn-button fasteners on the back hold a mirror/photo in the inset area.

  • To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.

❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.

Adjusting the fasteners:

Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe

You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.

Sol-Luna
The alchemists’ names for gold and silver, sun and moon. Opposites that keep each other in balance. For the things that come in cycles: a birthday, an anniversary, a season you look forward to, someone you miss at the same time every year.

Sanggam-inspired carving in Vulcan black clay, inlaid with buff clay slip. The rim of the oval window is glazed in dark and light matte tones that surface through the texture, and the rest is left raw.

Included:

  • A 5×7 mirror sheet

  • A hardboard backing.

Size and fit:

  • Shrine dimensions: Approx 17.5cmL x 14cmW x 3.5cmH

  • 5×7 Inset area: Approx 5.3cmW x 7.4cmH

How it works:

  • 2 turn-button fasteners on the back hold a mirror/photo in the inset area.

  • To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.

❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.

Adjusting the fasteners:

Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe