You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.
Serpentine:
Snakes shed their skin and carry on. A shrine for what you’ve outgrown, or what you’re protecting. For the things that mark a change or the version of you that’s arriving.
Sanggam-inspired carving: Vulcan black clay, inlaid with buff. The rim of the oval window is glazed in dark and light matte tones that surface through the texture. The rest is left raw. A tiny ledge at the base holds a micro keepsake or a palo santo.
Included:
A 5×7 mirror sheet
A hardboard backing.
Size and fit:
Shrine dimensions: Approx 19cmL x 12cmW x 3.7cmH
5×7 Inset area: Approx 5.4cmW x 7.2cmH
How it works:
2 turn-button fasteners on the back hold a mirror/photo in the inset area.
To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.
❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.
Adjusting the fasteners:
Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe
You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.
Serpentine:
Snakes shed their skin and carry on. A shrine for what you’ve outgrown, or what you’re protecting. For the things that mark a change or the version of you that’s arriving.
Sanggam-inspired carving: Vulcan black clay, inlaid with buff. The rim of the oval window is glazed in dark and light matte tones that surface through the texture. The rest is left raw. A tiny ledge at the base holds a micro keepsake or a palo santo.
Included:
A 5×7 mirror sheet
A hardboard backing.
Size and fit:
Shrine dimensions: Approx 19cmL x 12cmW x 3.7cmH
5×7 Inset area: Approx 5.4cmW x 7.2cmH
How it works:
2 turn-button fasteners on the back hold a mirror/photo in the inset area.
To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.
❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.
Adjusting the fasteners:
Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe