Heirloom Shrine

SGD 88.00

You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.

Heirloom:
Something passed down, or kept close. A shrine in the spirit of a locket, the kind that holds a photo of your grandma, or someone just as special. It borrows its motifs from vintage frames, in details small enough to belong on a necklace.

Dark matte shino glaze on Vulcan black clay. A tiny ledge at the base holds a micro keepsake or a palo santo.

Included:

  • A 5×7 mirror sheet

  • A hardboard backing.

Size and fit:

  • Shrine dimensions: Approx 16cmL x 12.5cmW x 5cmH

  • 5×7 Inset area: Approx 5.2cmW x 7.3cmH

How it works:

  • 2 turn-button fasteners on the back hold a mirror/photo in the inset area.

  • To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.

❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.

Adjusting the fasteners:

Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe

You don’t need a shrine to honour something. But you might want one. Inspired by vintage frames and photo lockets, this hand-built mini shrine in dark clay has an oval window to frame a mirror, a photo or whoever you’re devoted to.

Heirloom:
Something passed down, or kept close. A shrine in the spirit of a locket, the kind that holds a photo of your grandma, or someone just as special. It borrows its motifs from vintage frames, in details small enough to belong on a necklace.

Dark matte shino glaze on Vulcan black clay. A tiny ledge at the base holds a micro keepsake or a palo santo.

Included:

  • A 5×7 mirror sheet

  • A hardboard backing.

Size and fit:

  • Shrine dimensions: Approx 16cmL x 12.5cmW x 5cmH

  • 5×7 Inset area: Approx 5.2cmW x 7.3cmH

How it works:

  • 2 turn-button fasteners on the back hold a mirror/photo in the inset area.

  • To hang it, use the metal hanger on the back. The frame hangs in portrait orientation.

❗️This shrine isn’t built to stand on its own. It can lean, but secure it so it doesn’t fall.

Adjusting the fasteners:

Loosen or tighten the turn buttons with a screwdriver. If it gets too tight, adjust with a tool or the closed tip of a pair of scissors to keep your fingers safe